Hot runner system types and their application in plastic injection mold

1,How the Hot Runner System Works?

The cold runner of a plastic injection mold refers to the section between the mold inlet and the gate. The molten plastic maintains its fluidity inside the runner by virtue of the injection pressure and its own heat. However, as a part of the molding material, the runner is not a product. As a result, when designing a mold, we need to consider not only the filling effects, but also the material-saving effect produced by shortening or downsizing the runner; but in actuality, it is not easy for us to have the best of both worlds.this is why we need hot runner mold

Also known as the runner-less system, the hot runner is a system in which the molten plastic is not solidified after each injection, so when releasing the plastic part, the gate inside the runner does not have to be released. Since the plastic inside the runner is not solidified, the runner still stays unblocked when the next injection takes place.

hot runner system

2,The advantage of Hot Runner Molds compare to cold runner molds

Why has the hot runner system been developed? What benefits can the hot runner system bring us? Engineers familiar with the plastic injection molding process all know that the traditional injection molding is always associated with the following disadvantages:

a.Hard to fill; b. thin-walled large size parts easy to deform; c. material waste in the runner; d. inconsistent plastic part quality when using a multi-cavity mold, and so forth.

The appearance of the hot runner system has provided an almost perfect solution for these problems. Generally speaking, the hot runner system offers the following benefits:

■ Shorter cycle time

As it is not limited by the runner cooling time, the plastic part can be ejected in a timely manner after being molded and solidified. For the production of thin-walled small parts, the molding cycle can be kept within 5s.

■ Material saving

In a complete hot runner mold, material waste will not occur thanks to the absence of a cold runner. This is of a greater significance to the application projects of the more costly plastic materials. As a matter of fact, global major hot runner manufacturers had witnessed leap forward development during the years when world crude oil and raw plastic materials were expensive. This is because the hot runner technology is an effective way to reduce waste materials and thus lower raw material costs.

■ Reducing defective products, and improving product quality

The temperature of the molten plastic inside the runner system can be accurately controlled during the hot runner injection molding process, so that the plastic is able to flow into each cavity in a more consistent manner, thus guaranteeing consistent quality products. The hot runner gate is of a higher quality, so after mold release, the part produced will have a smaller internal stress, leading to a smaller part deformation. Therefore, many high quality products in the market are all produced with the hot runner mold.

■ Eliminating following steps, helpful for production automation

After being molded with a hot runner mold, the part will be the final product, so there will be no follow-up steps like gate trimming, recycling and runner cooling, thus helpful for production automation. Many manufacturers from both home and abroad have combined the hot runner system with automation, so as to greatly improve production efficiency.

3,The Hot Runner system types

  1. The mold that employs a hot sprue for direct or indirect material feeding, is referred to as a hot sprue mold.

direct hot runner

 

2,The mold that is designed with a hot runner manifold and a secondary hot sprue, is referred to as a hot runner mold.

indirect hot runner

Examples of hot sprue molds

(1) The hot sprue mold structure that feeds materials through the point gate. It is only suitable for the single-cavity mold, and is limited by the gate location.

point tip hot runner

2) The hot sprue mold structure with the end surface engaged in injection molding. It is suitable for the single-cavity mold, but sprue marks will be left on the part surface. The end surface of the hot sprue is machinable.

The hot sprue mold structure with the end surface hot runner

(3) The hot sprue/cold runner mold structure with a bit of the traditional runner features. This structure is able to produce multiple plastic parts at the same time, but some cold slugs will be produced.

The hot sprue/cold runner mold structure

Besides open gate hot runner as above,Now people start to choose valve gate hot runner for high class product.

What is valve gate hot runner system ?

Mount the hot sprue and the manifold into the injection mold, and then by way of heating, keep the fluidity of the plastic material after it is out of the barrel. The result is, the product gate seems to be able to contact with the nozzle directly. So, when releasing the product, the sprue is closed under the action of the needle valve. The application of one or more cold runners is thus avoided, realizing wasteless production.

valve gate hot runner

The advantages of the valve gate hot runner system include:

  • Shorten production cycle, improve production efficiency;
  • Since the cold runner is replaced, cold slugs will not be produced, thus saving a large amount of raw materials;
  • Improve product consistency, free from obvious gate marks;
  • Remarkably improve product appearance;
  • Help reduce product stress, minimize product deformation and structural brittleness, so the production capacity and life cycle of complex products are improved;
  • Offer more process control, allow accurate adjustment to the injection molding process;
  • Not limited by the change of plastic injection molding materials.

All copyright reserved by injection molding company Sositar Mould